Copper is a versatile metal that we find in many forms from pipes to cookware to jewelry. Cleaning copper is an essential task, but the process has different natures depending on the item that is being cleaned. Some decorative copper has a lacquer finish that will keep it from tarnishing. To clean these items, simply wash with soapy water and dry thoroughly. Do not polish or scrub these items as it will remove the protective coating.
Lacquer-free copper offers a different scenario. After time, this copper tarnishes and turns dark and dull. This tarnishing occurs when the copper reacts with the air and a patina develops. The color of the patina will vary with the copper and what it is exposed to. Inside the house, copper will gradually get an antique penny brown color. But if the copper is exposed to water, the patina will gradually develop a bluish green look. The patina protects copper from corrosion, but many people prefer their copper to be shiny and brilliant. For lacquer-free items, try the following methods to help remove patina and maintain shine:
Cleaning Copper by Boiling
What You Will Need:
- Salt
- White vinegar
- Pot large enough for copper item
- Water
- Liquid dishsoap
- Soft cloths
The Copper Cleaning Process:
- Fill pot with water.
- Add 1 tablespoon salt and 1 cup vinegar to the water.
- Place the copper item in the cleaning solution.
- Bring the water to boiling.
- Allow the copper item to boil in the water for several hours.
- When finished boiling, remove from heat and allow to cool.
- Wash with liquid dishsoap, rinse, and dry with soft cloth.
Removing Tarnish from Copper
What You Will Need:
- Small bowl
- Cleaning solution (choose one)
- Mild tarnish: vinegar, salt, and flour paste
- Moderate/severe tarnish: 1 part lemon juice and 1 part salt
- Tomato paste
- Rinse water
- Soft cloths
The Tarnish-Removal Process:
- Wash the item with warm water and dry thoroughly.
- Using the soft cloth, apply a small amount of the cleaning solution to the tarnished areas.
- Work the cleaning solution onto the copper by rubbing briskly with the soft cloth.
- Rinse away the cleaning solution well with clean water.
- Dry the item thoroughly using a clean soft cloth.
- Buff the copper to restore it’s original luster.
Additional Tips and Advice
- Polish copper surfaces with a soft cloth and beeswax to get a lasting copper shine.
- Do not use abrasive cleaner or steel wool to clean copper.
- High heat and moisture are enemies of copper and should be avoided.
- Copper pots can become tarnished because of strong acids and alkalis and, therefore, acidic foods like fruits, tomatoes, and vinegar should never be boiled in copper pots or copper-clad pots.
- Most pieces of decorative copper are given a factory-applied protective coating of lacquer. They will remain clean if we occasionally wash them with lukewarm, soapy water. Never polish them
- If the eating and cooking utensils made of copper have a lacquer coating it must be removed before using. To do this, place the item in boiling water with some washing soda. You can also remove lacquer if you rub it with a cloth wet with alcohol or acetone.
- Lacquered copper surfaces may require special care; follow all instructions from the manufacturer.
- To remove tarnish from copper pots. Rub with lemon halves dipped in salt.
{ 11 comments… read them below or add one }
Polish your copper with a combination of white vinegar and salt…just watch the tarnish disappear!! Cheaper and much safer than all those expensive and toxic copper cleaners in the stores.
A heavy layer of tarnish might require a repetition of this process but your copper (especially copper bottom revereware pots and pans) will end up sparkling like new!!
This is the old standby, it cleans a lot of things. The easiest way is to cut a lemon in half, dip the cut end in salt and scrub the copper with it, reapplying salt to the lemon half as necessary. You can use vinegar and salt instead, but it doesn’t work any better than the lemon juice and smells infintely worse.
I use these to clean my copper pots, although I wouldn’t use them for cleaning antiques. Just get some of those steel wool pads that have the blue soap inside them. Wet the pad, then gently scrub the copper clean. Thoroughly wipe or rinse off the blue soap, then buff the copper dry with a soft towel.
You probably already have some of this under the sink somewhere – if you don’t, get some! Since the copper you’re wanting to clean is probably rounded instead of flat, pour a little BKF powder onto the counter next to the sink. Dip a wet dishrag into the powder, then carefully clean the copper with it a small section at a time. Rinse the copper clean and then buff it dry so it will shine. Don’t let the copper air dry, that can leave spots or give birth to more tarnish.
Lemon juice and vinegar may be great for cleaning copper, but you shouldn’t cook things that have a lot of acid in them in a copper pot. The chemical reaction between the acid and the copper causes copper to leach out into the acidic food being cooked, and too much copper is toxic to humans. Modern copper cookware is usually lined with something else to prevent this from happening, but it’s better to be safe than sorry.
Some silver cleaners, the kind you dip silver in to remove tarnish, also work on tarnished copper. If what you’re trying to clean is too big to dip, you can put on a pair of chemical-proof rubber gloves and use a cloth dipped in the tarnish remover to clean your copper instead.
For cleaning windows, mirrows, or just about any surfaces..mix a T. of corn starch in 8 oz of water..spray and wipe with a clean soft cloth..amazing..and easy. inexpensive and no chemicials.
I saw this on TV and thought it was crazy but tried it. Use tomato ketchup to clean the copper bottom of pots and pans. I spread it thinly over the copper bottom. I left it on for about 1/2 hour, rinsed it off and my extremely dirty, discolored pan bottoms were like new. The bottom was shiny copper.
I use the blue scouring bads and it WORKS . Awesome !!!!
How do you clean copper jewelry that had a protective coating that has worn off in spots?
How can I get the paint off of the copper over my Bay Window
Can anyone suggest how I can remove paint splatters off of the copper that is over my Bay Windows, on the outside of my house?